261
Controls in detail
Driving systems
3
For information on cleaning the camera,
see “Rear view camera lens”
(
୴ page 422).
Activating the rear view camera
̈
Make sure that the ignition is switched
on.
̈ Engage reverse gear.
The rear view camera is activated.
Operating the monitor
The monitor is operated using four but-
tons located on a panel at the bottom of
the screen.
Monitor buttons
Switching the monitor on
You can switch the monitor on by:
ț Engaging reverse gear.
ț This activates the rear view camera
which switches the monitor on.
iIf you switched the monitor off using
the
; button, once you have enga-
ged reverse gear, you will need to press
the
; button. Only then will the mo-
nitor come on.
ț Pressing the ; button.
ț This activates the input for auxiliary
devices (AUX) on the monitor.
1 % Down
2 $ Up
3 m Access menu/confirm selection
4 ; Switch monitor on/off
5 Loudspeaker cover
nf_BA.book Page 261 Friday, January 25, 2008 3:53 PM
