A SERVICE OF

logo

534
Practical hints
Changing bulbs
5
̈ Switch off the lighting.
̈ Undo screws 1 and remove lamp
housing.
̈ Turn the bulb holder 2and remove it
together with the bulb.
̈ Pull the bulb out of the bulb holder
2.
̈ Press the new bulb into the bulb hol-
der
2.
̈ Screw the bulb holder 2 containing
the bulb into the lamp housing.
̈ Carefully reattach the lamp housing
and retighten screws
1.
License plate lamp W5W
1 Bulb holder with lens
2 Recess
̈ Insert a screwdriver or similar imple-
ment into recess
2 and carefully
pry off lens
1.
̈ Pull the bulb out of the bulb holder.
̈ Insert the new bulb.
̈ Align lens 1 and clip it in, making
sure that it engages.
nf_BA.book Page 534 Friday, January 25, 2008 3:53 PM