24
SERVSWITCH™ SUMMIT
Figure 4-4. The Selection Menu for a KV1502A (shown after
a hypothetical basic system configuration is finished).
4. Repeat steps 2 and 3 for each USM you want to connect to the Base Unit.
5. Connect a CIM and its computer CPU.
a. Connect the cable strands of an appropriate CIM to the desired ports on a
computer CPU:
• KV1515A (IBM PS/2 compatible CPUs): Plug the HD15 strand into the
CPU’s HD15 VGA video port. Plug the purple 6-pin mini-DIN keyboard
strand into the CPU’s 6-pin mini-DIN keyboard port. Plug the light
green 6-pin mini-DIN strand into the CPU’s 6-pin mini-DIN mouse port.
• KV1516A (Sun compatible CPUs): Plug the HD15 strand into the CPU’s
HD15 VGA video port. Plug the 8-pin mini-DIN strand into the CPU’s
8-pin mini-DIN keyboard/mouse port.
• KV1517A (USB CPUs of any platform): Plug the HD15 strand into the
CPU’s HD15 VGA video port. Plug the USB Type A strand into one of
the CPU’s USB Type A ports.
• KV1518A (serial CPUs, routers, etc.): See Appendix G for installation
instructions.
• KV1519A (local [single-user] IBM PS/2 compatible CPUs): See
Appendix C for installation instructions.
Selection Menu
Summit 8x32 Page 1/8
No Ch.ID Name Scn
-- -------- ------------ ---
1 01 03
2 02 NT40-Mail 03
3 03 Wins95_Bob 03
4 04 Wins98_Jack 03
5 05 Wins98_Jana 03
6 06 NT40-Fax 03
7 07 Wins95_Paul 03
8 08 Wins98_Sher 03
-- -------- ------------ ---
ScrlLock | Scan | Skip NCSL
3 03 Wins95_Bob 03
Page FKey Ent Esc
