13
CHAPTER 2: Specifications
Serial (continued): KV1518A: Supports X-ON/X-OFF flow control to
attached device; other characteristics are user-
selectable: 2400, 4800, 9600, or 19,200 bps; 7 or 8 data
bits; even, odd, or no parity; and 1 or 2 stop bits (if
7 data bits has been selected, there must be 2 stop bits)
Maximum
Distance: End to end, from CPUs to user stations: 500 ft. (152 m)
User Controls: On-Screen User Interface (OSUI);
Keyboard commands;
Rear-mounted ON/OFF rocker switch on each Base Unit
and USM
Indicators: On Base Units: All front-mounted: (1) Unit-power LED,
(1) port-power LED for each user and channel port;
On USMs: (1) Front-mounted unit-power LED
On CIMs: (1) Power/activity LED; near 6-pin mini-DIN
connector on KV1518A, near RJ-45 on other models
Connectors: On Base Units: All rear-mounted:
RJ-45 female to USMs:
KV1500A: (2);
KV1501A: (4);
KV1502A: (8);
KV1503A: (16);
RJ-45 female to CIMs:
KV1500A and KV1501A: (42);
KV1502A: (32);
KV1503A: (64);
(2) Internal-style micro D68 expansion ports (reserved
for future use);
(1) DB9 female RS-232 serial admin port for firmware
upgrades;
(1) IEC 320 male power inlet;
On USM (KV1510A): All-rear-mounted:
(1) RJ-45 female to Base Unit;
(1) HD15 female to monitor;
(2) 6-pin mini-DIN female: (1) to PS/2 keyboard,
(1) to PS/2 mouse;
(1) 8-pin mini-DIN female to Sun keyboard and mouse;
(1) DB9 female RS-232 serial admin port for firmware
upgrades;
(1) IEC 320 male power inlet;
