Command Set
4-
14
ADAM 4000 Series User’s Manual
ADAM-4017 Command Table
Command Syntax
Command Name Command Description Page No.
%AANNTTCCFF Configuration Set the address, input range, baud
rate, data format, checksum status
and/or integration time for the
specified analo
input module
5-4
$AA2 Offset Calibration Return the configuration
parameters for the specified
analo
input module
5-9
$AAF Read Channel Status
Return the firmware version code
from the specified analog input
module
5-11
$AAM Read Version Return the module name from the
specified analo
input module
5-12
#AA from Channel N Return the input values from all
channels of the specified analog
input module
5-13
#AAN Read Analog Input Return the input value from
channels number N of the
specified analo
input module
5-15
$AA5VV Configuration Status Enables/disables multiplexing
simultaneously for seperate
channels of the specified input
module
5-16
$AA6 Enable/disable
Channels for
Multiplexing
Ask the specified input module to
return the status of all eight
channels
5-17
$AA0 Read Analog Input
from all Channels
Calibrate the analog input module
to correct for
ain errors
5-18
$AA1 Span Calibration Calibrate the analog input module
to correct for offset errors
5-19
