Chapter 4
Chapter 4 Command Set
4-7
ADAM-4011D Command Table (Continued)
Command Syntax Command Name Command Description Page No.
@AADI Read Digital I/O and
Alarm Status
The addressed module returns the
state of its digital input channel, its
two digital output channels and the
status of its alarm
5-50
@AADO(data) Set Digital Output Set the values of the module's two
di
ital outputs
ON or OFF
5-52
@AAEAT Enable Alarm Enables the alarm in either
Momentary or Latching mode
5-54
@AAHI(data) Set High Alarm Downloads the High alarm limit
value
5-56
@AALO(data) Set Low Alarm Downloads the Low alarm limit
value
5-57
AADA Disable
larm
Disables all alarm functions
5-58
AACA Clear Latch Alarm
The latch alarm is reset
5-59
@AARH Read High Alarm The addressed analog input
module is asked to return its high
alarm value
5-60
@AARL Read Low Alarm The addressed analog input
module is asked to return its low
alarm value
5-61
@AARE Read Event Counter The addressed module is asked to
return its event counter value
5-62
@AACE Clear Event Counter The event counter is set to 0 5-63
