Filter
Top Products
8-6
8
10 * Swingarm pivots
• Check operation and for excessive play, and re-
place bearings if necessary.
• Lubricate with lithium-soap-based grease.
√√√
11 *
Upper and lower
arm pivots
• Lubricate with lithium-soap-based grease. √√√
12 Drive chain
• Check chain slack and adjust if necessary.
• Check rear wheel alignment and correct if necess-
sary.
• Clean and lubricate.
√√√√√
13 * Drive chain rollers • Check for wear and replace if necessary. √√√
14 * Chassis fasteners
• Make sure that all nuts, bolts, and screws are
properly tightened.
√√√√√
15 *
Shock absorber as-
semblies
• Check operation and correct if necessary.
• Check for oil leakage and replace if necessary.
√√√
16 *
Rear suspension re-
lay arm and con-
necting arm
pivoting points
• Check operation and correct if necessary.
• Lubricate with lithium-soap-based grease.
√√√√
17 * Steering shaft • Lubricate with lithium-soap-based grease. √√√
18 * Steering system
• Check operation and repair or replace if damaged.
• Check toe-in and adjust if necessary.
√√√√√
19 Engine oil
• Change.
• Check ATV for oil leakage, and correct if neces-
sary.
√ √√√
NO. ITEM
CHECK OR MAINTENANCE
JOB
INITIAL EVERY
Whichev-
er comes
first
month136612
km
(mi)
320
(200)
1300
(800)
2500
(1600)
2500
(1600)
5000
(3200)
hours 20 80 160 160 320
U5YT16E0.book Page 6 Friday, March 14, 2008 9:56 AM