Filter
Top Products
4-13
4
To install the seat
Insert the projections on the front of the seat into
the seat holders and push down on the seat at the
rear.
TIP
Make sure that the seat is securely fitted.
EBU18981
Adjusting the front shock absorber as-
semblies
The spring preload can be adjusted to suit the rid-
er’s weight and the riding conditions.
Adjust the spring preload as follows.
Turn the adjusting ring in direction (a) to increase
the spring preload and thereby harden the suspen-
sion, and in direction (b) to decrease the spring
preload and thereby soften the suspension.
1. Seat lock lever 1. Projection
2. Seat holder
U5YT16E0.book Page 13 Friday, March 14, 2008 9:56 AM