Filter
Top Products
4-16
4
NOTICE
ECB00090
Never turn an adjusting mechanism beyond
the minimum and maximum settings.
3. Tighten the locknut to the specified torque.
NOTICE
ECB00080
Always tighten the locknut against the adjust-
ing nut, and then tighten it to the specified
torque.
1. Special wrench
Spring preload setting:
Minimum (hard):
Distance A = 218.5 mm (8.60 in)
Standard:
Distance A = 228.5 mm (9.00 in)
Maximum (soft):
Distance A = 233.5 mm (9.19 in)
1. Distance A
Tightening torque:
Locknut:
42 Nm (4.2 m·kgf, 30 ft·lbf)
1
U5YT16E0.book Page 16 Friday, March 14, 2008 9:56 AM