Filter
Top Products
8-44
8
1. Remove the lens by removing the screws.
2. Remove the defective bulb by pushing it in
and turning it counterclockwise.
3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screws.
NOTICE
ECB00700
Do not overtighten the screws, otherwise the
lens may break.
EBU25651
Removing a wheel
1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
1. Screw
1. Tail/brake light bulb
U5YT16E0.book Page 44 Friday, March 14, 2008 9:56 AM