Filter
Top Products
8-40
8
3. Install the battery holding plate by installing
the bolts, and then hook the band to secure
the owner’s tool kit.
4. Install the seat. (See page 4-12.)
NOTICE
ECB00632
● Always keep the battery charged. Storing a
discharged battery can cause permanent
battery damage.
● To charge a VRLA (Valve Regulated Lead Ac-
id) battery, a special (constant-voltage) bat-
tery charger is required. Using a
conventional battery charger will damage
the battery. If you do not have access to a
constant-voltage battery charger, have a
Yamaha dealer charge your battery.
EBU25232
Replacing the fuse
The fuse holder is located under the seat. (See
page 4-12.)
If the fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off all electrical
circuits.
1. Positive battery lead (red)
2. Negative battery lead (black)
2
1. Fuse
2. Spare fuse
U5YT16E0.book Page 40 Friday, March 14, 2008 9:56 AM