Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-35
7
EAU49721
Replacing a license plate light
bulb
1. Remove the license plate light unit
bolts.
2. Remove the license plate light bulb
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in, and then
turning it clockwise until it stops.
6. Place the license plate light unit in
the original position, and then in-
stall the bolts.
1. License plate light unit
2. License plate light unit bolt
2
1
1. License plate light bulb socket
1. License plate light bulb
1
1
U23P11E0.book Page 35 Tuesday, August 7, 2012 4:57 PM