Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-8
4
display is flashing. If you do not reset
the fuel reserve tripmeter manually, it
resets itself automatically and the dis-
play returns to the prior mode after re-
fueling and traveling 5 km (3 mi).
Clock
The clock displays when the key is
turned to “ON”. In addition, the clock
can be displayed for 10 seconds by
pushing the left button when the main
switch is in the “OFF” or “LOCK” posi-
tion.
To set the clock
1. Push the left button and right but-
ton together for at least three sec-
onds.
2. When the hour digits start flashing,
push the right button to set the
hours.
3. Push the left button; the minute
digits start flashing.
4. Push the right button to set the
minutes.
5. Push the left button; the clock
starts after the button is released.
Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards “E” (Empty) as the fuel level
decreases. When the last segment
starts flashing, refuel as soon as possi-
ble.
When the key is turned to “ON”, all dis-
play segments come on once in order
to test the electrical circuit.
TIP
This fuel meter is equipped with a self-
diagnosis system. If a problem is de-
tected in the electrical circuit, all display
segments start flashing. If this occurs,
have a Yamaha dealer check the elec-
trical circuit.
1. Clock
2. Right set button
3. Left set button
3 2
1
1. Fuel meter
1
U23P11E0.book Page 8 Tuesday, August 7, 2012 4:57 PM