Yamaha XTZ12D(C) Utility Trailer User Manual


 
INSTRUMENT AND CONTROL FUNCTIONS
4-23
4
EAU49474
Adjusting the rider seat height
The rider seat height can be adjusted to
one of two positions to suit the rider’s
preference.
The rider seat height was adjusted to
the higher position at delivery.
To change the rider seat height to
the low position
1. Remove the rider seat. (See page
4-22.)
2. Remove the rider seat height posi-
tion adjuster by pulling it out.
3. Install the rider seat height position
adjuster so that the match mark is
aligned with the “L” mark as
shown.
4. Insert the projection on the rear of
the rider seat into seat holder A as
shown.
To change the rider seat height to
the high position
1. Remove the rider seat. (See page
4-22.)
2. Remove the rider seat height posi-
tion adjuster by pulling it out.
1. Low position
2. High position
1 2
1. Rider seat height position adjuster
1. Rider seat height position adjuster
2. “L” mark
3. Match mark
1
3
2
1
1. Projection
2. Seat holder A (for low position)
1
2
U23P11E0.book Page 23 Tuesday, August 7, 2012 4:57 PM