Filter
Top Products
4 - 64
ENG
CRANKCASE
INSTALLING THE OIL PUMP DRIVE GEAR
1.Install:
●
Straight key
●
Oil pump drive gear
●
Lock washer
●
Oil pump drive gear nut
New
2.Tighten:
●
Oil pump drive gear nut
*****************************************************
Tightening steps:
●
Temporary install the clutch carrier assembly 1.
●
Hold the clutch carrier assembly with a clutch
holding tool 2 and tighten the oil pump drive
gear nut 3.
●
Remove the clutch carrier assembly.
*****************************************************
3.Bend the lock washer tab 4.
Clutch holding tool:
P/N. YM-91042, 90890-04086
T
R
.
.
50 Nm (5.0 m • kg, 36 ft • lb)