Filter
Top Products
8-49
8. Put a new headlight bulb into position
and secure it in place with the bulb hold-
er.
1. Headlight bulb 2. Headlight bulb holder
9. Install the headlight bulb holder cover.
CAUTION:
_
Make sure the headlight bulb holder cover
is securely fitted over the bulb holder and
seated against the reflector.
_
10. Align the projections on the headlight unit
with the holders, install the headlight unit
into the case, and then install the screw.
1. Headlight unit 2. Headlight case
11. Place the headlight cover in the original
position, and then install the screw.
12. Connect the headlight coupler.
13. Place the headlight assembly in the orig-
inal position, and then install the bolts.
14. Have a Yamaha dealer adjust the head-
light beam if necessary.
U5LP12.book Page 49 Friday, April 26, 2002 2:47 PM