Filter
Top Products
8-21
EBU00780
Spark arrester cleaning
Be sure the exhaust pipe and muffler are cool
before cleaning the spark arrester.
1. Remove the bolt.
1. Bolt
2. Remove the tailpipe by pulling it out of
the muffler.
3. Tap the tailpipe lightly, then use a wire
brush to remove any carbon deposits
from the spark arrester portion of the
tailpipe.
1. Tailpipe 2. Spark arrester
4. Insert the tailpipe into the muffler and
align the bolt holes.
5. Install the bolt and tighten it.
U5LP12.book Page 21 Friday, April 26, 2002 2:47 PM