Filter
Top Products
8-7
4. If the engine oil is below the minimum
level mark, add sufficient oil of the recom-
mended type to raise it to the correct lev-
el.
NOTE:
_
When adding oil, be careful not to overfill the
engine oil tank; the oil level rises faster start-
ing from the half-level-portion on the dipstick.
_
5. Insert the dipstick into the oil filler hole,
and then tighten the oil filler cap.
CAUTION:
_
Make sure that the oil filler cap is securely
tightened, otherwise oil may seep out
when the engine is running.
_
To change the engine oil (with or without
oil filter cartridge replacement)
1. Engine guard 2. Bolt (× 6)
1. Remove the engine guard by removing
the bolts.
2. Start the engine, warm it up for several
minutes, and then turn it off.
3. Place an oil pan under the engine to col-
lect the used oil.
U5LP12.book Page 7 Friday, April 26, 2002 2:47 PM