Filter
Top Products
8-34
EBU01144
Drive chain slack check
NOTE:
_
Move the ATV back and forth and find the
tightest position of the drive chain. Check and/
or adjust the chain slack while it is in this tight-
est position.
_
To check the drive chain slack, all tires must
be touching the ground and there should be
no weight on it. Check the drive chain slack at
the position shown in the illustration Normal
slack is approximately 27–37 mm (1.1–1.5 in).
If the slack exceeds 37 mm (1.5 in), adjust it to
specification.
a. Drive chain slack
U5LP12.book Page 34 Friday, April 26, 2002 2:47 PM