Filter
Top Products
8-36
EBU00805
Lubricating the drive chain
The drive chain must be cleaned and lubricat-
ed at the intervals specified in the periodic
maintenance and lubrication chart, otherwise
it will quickly wear out, especially when riding
in dusty or wet areas. Service the drive chain
as follows.
1. O-rings
CAUTION:
The drive chain must be lubricated after
washing the ATV or riding in the rain.
Tightening torques:
Locknut:
16 Nm (1.6 m·kgf, 12 ft·lbf)
Upper wheel hub nut:
90 Nm (9.0 m·kgf, 65 ft·lbf)
Lower wheel hub nut:
90 Nm (9.0 m·kgf, 65 ft·lbf)
U5LP12.book Page 36 Friday, April 26, 2002 2:47 PM