Filter
Top Products
8-23
EBU00346
Clutch adjustment
1. Loosen the locknut.
2. Slowly turn the adjusting bolt counter-
clockwise until resistance is felt. Then,
turn it 1/8 turn clockwise.
1. Locknut 2. Adjusting bolt
3. Tighten the locknut to specification.
WARNING
POTENTIAL HAZARD
Operating with improperly serviced or
adjusted brakes.
WHAT CAN HAPPEN
You could lose braking ability, which
could lead to an accident.
HOW TO AVOID THE HAZARD
After servicing:
● Make sure the brakes operate
smoothly and that the free play is cor-
rect.
● Make sure the brakes do not drag.
Replacement of brake components re-
quires professional knowledge. These
procedures should be performed by a
Yamaha dealer.
Tightening torque:
15 Nm (1.5 m·kg, 11 ft·lb)