Filter
Top Products
8-5
EBU00270*
Engine oil
Engine oil level measurement
1. Place the machine on a level place.
2. Warm up the engine for several min-
utes and stop it. Wait at least ten min-
utes for the oil to drain back into the
crankcase before checking the oil
level.
N
O
TE:
Wait at least ten minutes until the oil level
settles before checking.
3. Remove the dipstick and wipe it off
with a clean rag. Insert the dipstick in
the filler hole without screwing it in.
4. Remove the dipstick and inspect the
oil level.
5. The oil level should be between the
maximum and minimum marks. If the
level is low, add oil to raise it to the
proper level.
CAUTION:
Be sure no foreign material enters the
crankcase.
1. Dipstick 2. Maximum level mark
3. Minimum level mark