Filter
Top Products
8-10
2. Place the machine on a level place.
3. Place a container under the final gear
case.
4. Remove the oil filler bolt and the drain
plug to drain the oil.
1. Drain plug
5. Install the drain plug and tighten to the
specified torque.
6. Fill the final gear case with oil.
CAUTION:
Be sure no foreign material enters the final
gear case.
7. Install the filler bolt and tighten to the
specified torque.
8. Check for oil leakage. If oil leakage is
found, check for the cause.
9. Reinstall the final gear case cover.
Tightening torque:
Drain plug (final gear case):
23 Nm (2.3 m·kg, 17 ft·lb)
Recommended oil:
SAE 80 API “GL-4” Hypoid gear oil
Oil quantity:
Periodic oil change:
0.25 L (0.21 Imp qt, 0.27 US qt)
Total amount:
0.27 L (0.23 Imp qt, 0.29 US qt)
Tightening torque:
Filler bolt (final gear case):
23 Nm (2.3 m·kg, 17 ft·lb)