Filter
Top Products
8-9
EBU00278*
Final gear oil
Final gear oil measurement
1. Place the machine on a level place.
2. Remove the oil filler bolt and check the
oil level. It should be up to the brim of
the hole. If the level is low, add oil to
raise it to the proper level.
CAUTION:
Be sure no foreign material enters the final
gear case.
3. Install the oil filler bolt and tighten to
the specified torque.
1. Final gear oil 2. Correct oil level 3. Oil filler bolt
Final gear oil replacement
1. Remove the final gear case cover.
Tightening torque:
Oil filler bolt:
23 Nm (2.3 m·kg, 17 ft·lb)