Filter
Top Products
8-17
EBU00312
Front brake pad inspection
Inspect the brake pads for damage and
wear. If the thickness is less than the spec-
ified value, have a Yamaha dealer replace
the pads.
1. Brake pad a. Wear limit: 1 mm (0.04 in)
N
O
TE:
The wheels need to be removed to inspect
the brake pads. See page 8-26 for removal
procedures.
EBU00313
Rear brake shoe inspection
A wear indicator is provided on the rear
brake. This indicator allows checking of
brake shoe wear without disassembling
the brake. Apply the rear brake and check
the position of the indicator. If the indicator
reaches the wear limit line, ask a Yamaha
dealer to replace shoes as a set.
1. Wear indicator 2. Wear limit