Wintec Industries WBT-100 GPS Receiver User Manual


 
14
future, whenever the USB device is connected to USB port on the computer, the COM 3
acts as the interface for data communication.
Part 8 Software interface
WBT-100 Software Interface output asbelow.
NMEA ((National Marine Electronics Association) 0183 Version 3.0 (ASCII Format)
Baud Rate: 9600 bps, 8(Data Bits), Stop bit, No parity
WBT 100 Factory Setting
Function describe
Communication data and setting
NMEASupport Format
GPRMC, GPGSV, GPGSA, GPGLL, GPGGA, GPVTG, GPZDA
Default GPRMC, GPGSV, GPGSA, GPGGA
baud rate 9600 bps
Receiver mode status
GPS GPS data will be auto-logged according to the interval. If
interval is programmed to “0”, auto log features is deactivated.
Bluetooth will turn off after 10 min from deactivation of auto-log
for the power saving purpose.
Electronic compass Under compass mode, north direction can easily be found. If
used is a new surrounding, re-calibrate again for accuracy
Bluetooth After Bluetooth connection is initiated but connection is not
established in 5 min, WBT-100 will automatically turn off for the