Filter
Top Products
10
Data can be read out thru USB or bluetooth
Data includes latitude, longitude, time in year-month-date-min-sec
After successful positioning, it wills automatically auto-log GPS data into its internal
memory chip. Use G-tool to program log interval (1~ 3600 sec). The factory default is
set at 5 sec interval for the auto-logging. If interval is set to 0 sec, this auto-log
feature is deactivated. Log data is recorded in a rotational order. The earliest (oldest)
data will replaced by the latest (newest) one when memory space is full (when data
excesses 12680 maximum).
Auto-log will continue even if the Bluethooth is off.
If interval 0 sec is set, auto-log stops to work. Its power will be off after 10 min the
Bluetooth is switched off. Auto-log will not shut down if interval is set higher-than 0 sec.
Part 7 USB Driver Installation Guide
1 Execute installation and click “Install”.
“
2 Installation is done when this screen displays.