Filter
Top Products
29 ‘05 - ‘06 Tacoma (W/ O.E. Hitch) - 3” Kit 5613
b. Apply a small amount of kit Loctite® to six kit
bolts (3/8” x 1”) and install front bumper to kit
brackets (front bumper) with twelve kit washers
(3/8” USS) and six kit nuts (3/8” Nylock).
c. Install front bumper cover to vehicle with six fac-
tory screws.
Kit Bolts
(3/8” x 1”),
Kit Washers
(3/8” USS),
Kit Nuts
(3/8” Nylock)
Front
Bumper
Kit Bracket
(Front
Bumper)
Front
Bumper
Fascia
Screws
d. Install two pop-up clips to fender wells.
e. Install five pop-up clips to front bumper.
f. Install two pop-up clips, two bolts and grill to
core support.
g. Install wiring harnesses to fog lights, if equipped.
h. Adjust bumper and tighten all hardware.
Fender Well
Front
Bumper
Pop-up
Clip
Pop-up
Clips
Front
Bumper
Screws
Pop-up
Clips
Grill
Wiring
Harness
Fog Light