Filter
Top Products
24 ‘05 - ‘06 Tacoma (W/ O.E. Hitch) - 3” Kit 5613
Engine Compartment
1. Steering shaft
a. Install upper steering shaft into kit extension
(steering), ensuring marks on upper and lower
steering shaft are aligned.
b. Position kit extension (steering) into steering
coupler. Ensure marks on upper and lower
steering shaft are aligned.
c. Apply a few drops of kit Loctite® to factory bolts
and kit bolt (3/8” x 1-1/4”).
d. Install bolts and tighten to 33 lb.-ft.
WARNING
Verify the steering extension is securely installed as
specified in the instructions. Failure to do so may
cause steering malfunction, resulting in property dam-
age or serious personal injury.
Kit Extension
(Steering)
Upper Steering
Shaft
Steering Coupler
& Bolts
Kit Extension
(Steering)
Alignment
Mark
Lower Steering
Shaft
Kit Bolt
(3/8” x 1-1/4”)
Alignment
Mark
2. Radiator
a. Cut off tabs on upper radiator mounts.
b. Install four kit brackets (3” radiator) to radiator
mounts with four factory bolts. DO NOT
TIGHTEN.
Upper
Radiator
Mount
Radiator
Core
Support
Tab
Factory
Bolt
Radiator
Kit Bracket
(3” Radiator)