Filter
Top Products
21 ‘05 - ‘06 Tacoma (W/ O.E. Hitch) - 3” Kit 5613
3. Carefully bend brake lines and install bolt and brake
line bracket to frame.
4. Brake lines
a. Install kit bracket (2” Z-shaped) and factory bolt
to driver side frame.
b. Install brake line bracket to kit bracket (2” Z-
shaped) with kit bolt (1/4” x 1”), two kit washers
(1/4” SAE) and kit nut (1/4” Nylock).
c. Repeat above steps for passenger side.
Inside of Vehicle
1. Extended cab models: Rear interior trim panels
a. Install body mount access covers.
Frame
Brake Line
Bracket
Bolt
Kit Bolt
(1/4” x 1”),
Kit Washers
(1/4” SAE),
Kit Nut
(1/4” Nylock)
Factory Bolt
Kit Bracket
(2” Z-Shaped)
Brake Line
Bracket
Access
Cover
b. Install driver and passenger body mount access
plates and bolts.
c. Lay carpet down to cover driver and passenger
body mount access plates.
d. Install storage tray and pop-up clips to vehicle.
e. Install jack into storage tray.
Access
Plate
Carpet
Bolts
Rear
Pop-up
Clips
Storage Tray
Rear Seat
Storage Tray
Jack
Rear Seat