Filter
Top Products
13 ‘05 - ‘06 Tacoma (W/ O.E. Hitch) - 3” Kit 5613
c. Install kit block (2” dia.) on upper bushings on
front core support cab mount.
d. Install kit blocks (3” dia.) on upper bushings on
each remaining cab mount.
e. Lower cab onto kit blocks.
f. Install factory front captive washer and a kit bolt
(3/8” x 8”) on core support cab mount. DO NOT
TIGHTEN.
Kit Block
(2” Dia.)
Upper Bushing
Front Cab Mount
Kit Block
(3” Dia.)
Upper Bushing
Mid Cab Mount
Rear Cab Mount
Kit Block
(3” Dia.)
Upper Bushing
Kit Bolt
(3/8” x 8”)
Front Cab Mount
g. Install factory mid captive washer and kit bolt
(M12-1.75 x 200mm) on cab mount. DO NOT
TIGHTEN.
h. Install factory rear captive washer and kit bolt
(M12-1.25 x 210mm) on cab mount. DO NOT
TIGHTEN.
Kit Bolt
(M12-1.75 x 200mm)
Mid Cab Mount
Kit Bolt
(M12-1.25 x 210mm)
Rear Cab Mount