Filter
Top Products
2 ‘05 - ‘06 Tacoma (W/ O.E. Hitch) - 3” Kit 5613
Before Starting Installation
1. Carefully read all warnings and instructions com-
pletely before beginning.
2. Verify all parts have been received in this kit by
checking the parts list at the end of this document.
3. Only install this kit on the vehicle for which it is
specified. If anytime during the installation you
encounter something different from what is outlined
in the instructions, call technical support at (928)
636-7080.
4. Special tools needed:
a. Welder or access to a professional welding
shop.
b. Die grinder or similar tool capable of cutting
metal.
5. Park vehicle on a clean, dry, flat, level surface and
block tires so vehicle cannot roll in either direction.
Engine Compartment
1. Disconnect both battery cables. Disconnect nega-
tive cable first, then positive cable.
NOTE
Kit parts are prefaced by the word kit and appear in
bold print.
NOTE
If parts are missing from kit, please be prepared to pro-
vide the following information:
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
5. Inspector # from inside box cover
Negative
Cable (Black)
Positive
Cable (Red)
Inside Cab
1. Airbag Fuse
a. Remove fuse cover.
b. Remove airbag fuse.
Prepare to Install Kit
Measurements
1. Measure and record distance between rear bumper
and bed
Driver Side ________ Passenger Side _________
2. Measure and record distance between cab and bed.
Driver Side ________ Passenger Side _________
NOTE
The location of the airbag fuse may vary; check the
owner's manual.
Fuse Cover
Fuse Location
May Vary
Airbag Fuse