Filter
Top Products
ME(H4DOTC)-45
MECHANICAL
Engine Assembly
(5) Accelerator cable (MT model)
(6) Clutch release spring (MT model)
12) Disconnect the following hoses.
(1) Brake booster vacuum hose
(2) Heater inlet outlet hose
13) Remove the power steering pump from brack-
et.
(1) Loosen the lock bolt and slider bolt, and
then remove the front side V-belt. <Ref. to
ME(H4DOTC)-54, FRONT SIDE BELT, RE-
MOVAL, V-belt.>
(2) Disconnect the power steering switch con-
nector.
(3) Remove the pipe with bracket from intake
manifold.
(4) Remove the power steering pump from en-
gine.
(5) Remove the power steering tank from
bracket by pulling it upward.
ME-00031
ME-00032
ME-00033
ME-00034
ME-00035
ME-00036
ME-00037
ME-00038