Filter
Top Products
LT-12 SERIES LIGHT TOWER — OPERATION MANUAL — REV. #1 (08/15/08) — PAGE 15
LT-12 SERIES LIGHT TOWER — COMPONENTS
18. Engine Exhaust Pipe – Directs engine exhaust to the rear
of the light tower. NEVER block this exhaust pipe with obstruc-
tions. ALWAYS place the generator in an area free of
obstructions.
Figure 4. Major Components (Front/Rear)
19. License Light – This light illuminates the license plate.
Whenever towing of the light tower is required, make sure this
light is operational.
20. Brake Lights – Before towing the light tower, make sure that
these lights are operational and are working correctly. NEVER
tow the light tower if these lights are inoperative.
The exhaust pipe will become extremely hot
when the engine is in use. NEVER touch the
exhaust pipe when the engine is running. The
possibility exists of severe burns to the skin.
Allow the exhaust pipe to
cool
before
touching.
21. Tires – This light tower uses a ST175-13C size tire. Replace
with only recommended tire size. NEVER tow light tower with
bad or worn tires.
22. Documentation Box – Contains information regarding the
light tower.
23. 240 VAC Twist-Lock Receptacle – This twist-lock recep-
tacle provides 240 VAC, 25 amps.
24. 120 VAC GFCI Receptacle – This GFCI receptacle provides
120 VAC, 15 amps.
CAUTION - Burn Hazard