Stanley Black & Decker CT10 1650 PSI Automobile Parts User Manual


 
20
CT10056DN & DH PARTS LIST
Item
No.
Part No. Qty Description
1 00118 1 Retaining Ring
2 00144 14 HSHCS
3 07626 2 O-Ring
4 09330 1 O-Ring
5 00294 1 O-Ring
6 00360 1 O-Ring
7 00936 2 Adapter
8 01259 1 O-Ring
9 01521 2 HSHCS
10 01534 1 Roll Pin
11 01608 4 Steel Ball
12 01809 1 Valve Spool
13 01812 1 Valve Spool Screw
14 06332 1 O-Ring
15 08337 1 Ball Detent
16 09906 1 Jam Nut
17 16556 1 Spring
18 18050 1 Back-Up Ring
19 21424 1 Relief Valve
20 22147 2 Capscrew
21 24446 1 Push Rod
22 67264 1 C-Frame *
22A 25513 1 C-Frame **
23 67278 1 Ball Plunger *
23A 25833 1 Ball Plunger **
24 68272 1 Setscrew *
24A 25834 1 Setscrew **
25 67282 1 Slotted Capscrew *
25A 25837 2 Slotted Capscrew **
26 38622 1 Valve Sleeve
27 39925 1 Compression Spring
28 39939 1 Valve Handle
29 51182 1 Trigger Guard
30 51183 1 Trigger
31 52534 2 Setscrew
32 58439 1 Adapter
33 58440 1 Retaining Ring
34 58441 1 Sleeve
35 58442 1 Oil Tube
36 58480 1 Piston
Item
No.
Part No. Qty Description
37 58481 1 Cylinder
38 67276 1 Cylinder Head *
(See Note 1)
38A 58482 1 Cylinder Head **
39 58485 1 O-Ring
40 58499 1 Sticker
41 58583 1 T-Seal
42 58594 1 Retaining Ring
43 67259 1 Check Valve Assy *
44 06326 1 Washer *
45 03014 1 Washer *
46 67281 1 Capscrew *
47 68318 1 Jam Nut * (See Note 1)
48 68317 1 Cylinder Head * (See Note 1)
58551 1 SEAL KIT
NOTE 1: Items 38, 38A and 48 differ in several ways and
are not interchangeable. The following information explains
the differences.
Item 38A contains 2-1/8-16UN threads and cannot be used
with items 22 and 48/47 that contain M60 metric threads.
Likewise, items 22, 38 and 48 that contain M60 metric
threads cannot be used with items 16, 22A and 38A that
contain 2-1/8-16UN threads.
Item 48 is used with a jam nut (item 47) whereas item 38
does not use a jam nut. Item 38 and 48 can be identied
by measuring the length of the threads (see gure below).
The length of threads for item 38 is 1.100 inches. For item
48 the length is 1.750 inches.
CT10016N
Cyl Head P/N Thread Length Thread Diameter
67276 (item 38) 1.100 M60x1.5 (metric)
58482 (item-38A) 1.650 2-1/8 in.
68317 (item 48) 1.750 M60x1.5 (metric)
To determine which model you have, measure the thread
length and diameter on the cylinder head.