Filter
Top Products
31
Using applications
Before using your CLIÉ™ handheld with the car cradle, you have to install
software for the car cradle on your CLIÉ handheld.
Install the Car Cradle basic software from the supplied Installation CD-ROM.
When you use the StreetFinder
®
application, install the StreetFinder
®
C
3
Travel Navigation Software, too.
b For details about installing the Car Cradle basic software, refer to “Installing software
for the car cradle” on page 15.
b For details about installing the StreetFinder
®
C
3
Travel Navigation Software, refer to
the StreetFinder User’s Guide.
Starting an application
Another way to start an application (by the wireless card
remote commander)
1
Mount your CLIÉ handheld in the car cradle.
The Warning message is displayed.
2
Tap the screen to cancel the Warning message (page 23).
The Car Launcher screen in displayed.
3
Tap an application icon on the Car Launcher screen.
The application screen is displayed.
1
Mount your CLIÉ handheld in the car cradle.
The Warning message is displayed.
2
Press any button on the remote commander to cancel the
Warning message.
The Car Launcher screen is displayed.
Tip
If an application screen is displayed, press the HOME button to display the Car
Launcher screen.
3
Press the B/b or V/v button to select the desired
application on the Car Launcher screen.
4
Press the ENTER button.
The application screen is displayed.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •