Filter
Top Products
19
Step 2: Setting up your CLIÉ™ handheld for
the car cradle
Follow the setup procedure according to your CLIÉ handheld type.
Removing the protection cover (short screen type)
Before mounting and using your CLIÉ handheld in the car cradle, you need to
remove the protection cover.
Whenever you use your CLIÉ handheld with the car cradle, remove the
protection cover.
b For details about attaching the cover, refer to the manual supplied with your CLIÉ
handheld.
Changing the operating style (long screen type)
Before mounting, you need to change the operating style.
Set your CLIÉ handheld to the “turned style.”
b For details about closing the display panel, refer to the manual supplied with your
CLIÉ handheld.
Push 1 with
your left hand.
Remove the cover in
the direction 2 pulling
the other side of 1.
Open the display and
rotate it as indicated by
the arrow until it clicks into
place.
Fold the display
over the keyboard.
bb
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •