Filter
Top Products
26
About Sleep mode
If your CLIÉ handheld is turned off during in-vehicle mode, it enters in-vehicle
sleep mode.
To exit in-vehicle sleep mode
• Switch to in-vehicle mode:
– turn on your CLIÉ handheld.
• Switch to normal CLIÉ mode:
– detach your CLIÉ handheld from the car cradle.
Note
Your CLIÉ handheld battery is continuously charged during in-vehicle sleep mode.
About HOLD mode
If you set your CLIÉ handheld to HOLD mode and mount your CLIÉ handheld
in the car cradle, HOLD mode continues and your CLIÉ handheld enters in-
vehicle mode.
– The screen is turned off after the Warning message is displayed and touch
panel/button operation is not available.
– The wireless card remote commander of the car cradle is available.
– Car audio operation is available only when the SONY-BUS connection
adapter is connected.
– The caution alarm is available.
b For details about HOLD mode, refer to the manuals supplied with your CLIÉ
handheld.
Note
Before turning off the HOLD mode, park your car in a safe place and detach your CLIÉ
handheld from the car cradle, then turn off the HOLD mode.