Filter
Top Products
Remote Keyless Entry (RKE)
System Operation
The vehicle’s doors can
be locked and unlocked,
and the trunk can be
unlatched from about
3 feet (1 m) up to 60 feet
(18 m) away with the
Remote Keyless Entry
(RKE) transmitter.
Q(Lock): Press the lock button to lock all the doors.
If enabled through the Driver Information Center (DIC),
the parking lamps may flash once and the horn may chirp
to indicate locking has occurred. See “LOCK HORN”
under DIC Vehicle Personalization on page 3-45.
" (Unlock): Press the unlock button one time to
unlock the driver’s door. Press the unlock button
again within five seconds to unlock the other doors.
The interior lamps will come on and stay on for
20 seconds or until the ignition is turned on. If enabled
through the DIC, the parking lamps will flash once
to indicate unlocking has occurred. See “UNLOCK
HORN” under DIC Vehicle Personalization on
page 3-45.
V(Trunk Release): Press and hold this button for
approximately one second to release the trunk lid.
The trunk release will only work if the ignition is off or
the vehicle speed is less than 2 mph (3 km/h).
L(Vehicle Locator/Panic Alarm): Press and release
this button to help locate your vehicle. The horn will
sound three times and the hazard lamps will flash three
times. Press and hold the button for three seconds to
sound the panic alarm. The horn will sound and
the hazard lamps will flash for 30 seconds. The ignition
must be off for the vehicle locator/remote alarm to
work. Press the vehicle locator/panic alarm button again
or turn the ignition to ACC/ACCESSORY or ON/RUN
to turn off the alarm.
The vehicle may have Remote Lock/Unlock Confirmation.
This feature provides feedback that a command has been
received by the vehicle. The parking lamps will flash and
the horn may sound briefly. See “LOCK HORN” and
“UNLOCK HORN” under DIC Vehicle Personalization on
page 3-45 for programming information.
2-4