Filter
Top Products
3. Pull the air compressor inflator hose from the
sealant canister.
4. Push the air compressor inflator hose onto the tire
valve stem and push the lever down to secure in
place.
5. Plug the air compressor accessory plug into an
accessory power outlet in the vehicle. See
Accessory Power Outlet(s) on page 3-16 for more
information.
{CAUTION:
Idling the engine in a closed-in place or with
the climate control system off can cause
deadly carbon monoxide (CO). See Engine
Exhaust on page 2-27.
6. Start the vehicle. See Starting the Engine
(Key Access) on page 2-18 for more information.
The vehicle must be running while using the
air compressor.
{CAUTION:
Inflating something too much can make it
explode, and you or others could be injured.
Be sure to read the inflator instructions, and
inflate the tire to its recommended pressure.
Do not exceed 36 psi (248 kPa).
7. Push the sealant and compressor kit switch to
the I (on) position.
8. Inflate the tire up to the recommended inflation
pressure using the air pressure gage on the top
of the unit.
The pressure gage reads high while the compressor
is running. Turn the compressor off to get an
accurate reading. See Inflation - Tire Pressure on
page 5-56 for more information.
9. Turn off the air compressor by moving the switch to
the O (off) position.
5-81