Filter
Top Products
Climate Controls
Climate Control System
With this system you can control the heating,
cooling, and ventilation for the vehicle.
Operation
To change the current mode, use the right knob to
select one of the following:
H(Vent): This mode directs air to the instrument
panel outlets.
)(Bi-Level): This mode directs air to the
instrument panel outlets and to the floor outlets.
Cooler air is directed to the upper outlets and
warmer air to the floor outlets.
6(Floor): This mode directs most of the air to
the floor outlets with some air directed to the
windshield.
When the floor mode is selected, the system will
turn recirculation mode off and run the air
conditioning compressor unless the outside air is
at or below freezing. Entering this mode may
force the engine into the start/stop mode. See “Air
Conditioning and Engine Start/Stop” later in this
section. Recirculation mode cannot be selected
while in floor mode. This helps prevent window
fogging and moisture building up within the cabin.
The right knob can also be used to select defog
or defrost mode. See “Defogging and Defrosting”
later in this section.
156