Filter
Top Products
9 (Fan): Turn the center knob on the control
panel to control the fan speed. Turn the knob
clockwise or counterclockwise to increase
or decrease the fan speed.
9 (Off): Turn the center knob to this position to
turn the fan off.
? (Recirculation): Press the center knob on
the control panel to recirculate air inside the
vehicle and prevent outside air from coming in.
It can be used to prevent outside odors from
entering your vehicle and cool the air inside your
vehicle more quickly. Press this button to turn
the recirculation mode on or off. An indicator light
on the button can on while the recirculation
mode is activated.
Recirculation is available in the bi-level and vent
modes. If recirculation is selected in either
floor/heat, floor/defog, or defrost mode, the
indicator light will flash three times indicating it is
not available in that mode.
The right knob on the control panel is used to
direct the airflow inside the vehicle. Turn the knob
to select one of the following modes:
H (Vent): Turn the right knob on the control
panel to this mode to direct air to the instrument
panel outlets.
\ (Bi-Level): Turn the right knob on the control
panel to this mode to direct air to the instrument
panel outlets, and the remaining air to the
floor outlets and the defroster and side window
outlets. Cooler air is directed to the upper outlets
and warmer air to the floor outlets.
[ (Floor): Turn the right knob on the control
panel to this mode to direct most of the air to the
floor outlets. The remaining air is directed to the
side window and defroster outlets. If low or no
airflow is on the passenger side, make sure that the
carpet covering is tucked under floor outlets.
124