Filter
Top Products
5. Pull the convertible top forward by firmly
gripping the side edge (B) and applying a
brisk upward and forward motion to get the
top in the full-up position.
6. Pull the front edge (A) of the convertible top
forward from the outside of the vehicle, or
push the front edge (A) of the convertible
top forward from the inside of the vehicle.
7. Turn the top front latch handle clockwise to
latch the convertible top.
8. Close the trunk (D) by pushing it down with
a swift, firm motion.
9. At the rear edge of the convertible top, press
down on the two buttresses (C) to latch them
into the top of the trunk.
A clear Mylar
®
protective film has been installed
at the factory on the trunk lid surface under
the convertible top buttresses. This film is
designed to help prevent paint damage to the
trunk lid. Do not remove this protective film.
It is intended to remain permanently affixed to
the trunk lid surface.
104