Filter
Top Products
Using the Tire Inflator Kit
To use the tire inflator kit:
1. Place the inflator kit on the ground and
unwrap the sealant filling hose from the
compressor.
2. Remove the air compressor accessory plug
from the unit. To do this, pull the top portion
of the wrapped cord out first, then the bottom,
and then unsnap the plug. Do not insert the
plug into an accessory outlet yet.
3. Remove the valve stem cap from the flat tire
by turning it counterclockwise.
If an object, such as a nail, has penetrated
the tire, do not remove it.
4. Attach the sealant filling hose (A) onto the tire
valve stem. Turn it clockwise until it is tight.
Make sure the inflator kit on/off switch (B) is in
the O (off) position.
5. Plug the air compressor accessory plug (C)
into an accessory power outlet in the vehicle.
See Accessory Power Outlet(s) on page 153
for more information.
323