Filter
Top Products
Setting the Time
Your vehicle has a radio with a H (clock) button
for setting the time and date.
To set the time and date, follow these instructions:
1. Turn the radio on.
2. Press the
H button and the HR, MIN, MM,
DD, YYYY (hour, minute, month, day, and
year) displays.
3. Press the pushbutton located under any one
of the labels to be changed. Every time the
pushbutton is pressed again, the time or
the date if selected, increases by one.
• Another way to increase the time or date, is
to press the right
¨ SEEK arrow or \
FWD (forward) button.
• To decrease the time or date, press the left
© SEEK arrow or s REV (reverse)
button, or turn the
f knob, located on the
upper right side of the radio.
The date does not automatically display. To see
the date press the
H (clock) button while the radio
is on. The date with display times out after a
few seconds and goes back to the normal radio
and time display.
To change the time default setting from 12 hour to
24 hour or to change the date default setting
from month/day/year to day/month/year, follow
these instructions:
1. Press the
H button and then the pushbutton
located under the forward arrow label. Once
the time 12H and 24H, and the date
MM/DD/YYYY (month, day, and year) and
DD/MM/YYYY (day, month, and year)
displays.
2. Press the pushbutton located under the
desired option.
3. Press the
H button again to apply the
selected default, or let the screen time out.
194