Sanyo NVM-4370 GPS Receiver User Manual


 
26
4. The mobile phone will often require you to enter a password to connect the device. Enter “0000” on the mobile phone in this
case.
5. When the connection completes, the name of the connected phone is displayed on the title bar of the “Communications” screen.
And the Bluetooth icon changes to green.
4.1.2 Mobile phone connection (Reconnect)
1. Set Bluetooth to “ON” on the “Settings”, and tap the “Connection” button of the “Communications” screen. The mobile phones
that have connected in the past are displayed on the “Paired List”.
2. Select one of the mobile phones and tap the “Connect” button.
3. The mobile phone will often require you to enter a password to connect the device. Enter “0000” on the mobile phone in this
case.
4. When the connection completes, the name of the connected phone is displayed on the title bar of the “Communications” screen.
And the Bluetooth icon changes to green.
NOTE: If the connected mobile phone has the Bluetooth auto-accept function, set this function to “ON”.
(For more detailed information, see your phone’s manual.)