Filter
Top Products
-
73
-
(2) Starter runs but engine not
Problem and check item Description Remedy
Check engaged
state of pinion and
ring gear.
Motor idles and engine does not
run.
(1) Remove and check the starter. Check
or replace the pinion clutch if
necessary.
(2) Check battery charged state and
battery terminal connection or
corrosion for any abnormality.
If pinion and r ing gear do not
engage with each other and
abnormal noise is heard between
end faces of pinion and ring gear,
check the starter pinion and ring
gear.
(3) Both starter
and engine run,
but the engine
does not start.
Check if the rotation speed is
normal or slow. If slow, check the
battery and engine oil viscosity.
(1) Remove the starter and check pinion
and ring gear end f aces. If worn,
replace the pinion and ring gear.
(2) In case of sliding fault of the pinion,
correct it.
(3) If shift lever or spring is deformed,
replace it.
(1) When the rotation speed is normal
Check the ignition system and fuel
system.
(2) When the rotation speed is slow
(a) Check the battery.
(b) Check the viscosity of engine oil. If
not normal, change the oil.
(c) If both (a) and (b) are normal
Remove and check the starter.
RING GEAR
PINION GEA
R