Subaru Robin Power Products EX17 Automobile Parts User Manual


 
-
41
-
(23) GOVERNOR LEVER
(a) Pass the governor rod through the rod spring, then connect to the throttle lever of the carburetor.
(b) Attach the governor rod and rod spring to the governor lever, then mount the governor lever on the governor
shaft. Do not adjust the bolt on the governor lever yet.
(c) Connect the governor lever and the speed control lever with the governor spring.
NOTE : See page 42 for details on the adjustment method after mounting air cleaner base.
Variation of the governor spring
The dimensions of the governor spring are different each other according to the Hz.
The governor spring for the standard engine is same as that for the engine to be connected to the 60Hz generator.
Discrimination according to the dimensions:
Fig. 5-55
GOVERNOR ROD
and ROD SPRING
GOVERNOR SPRING
Long
length side
Short
length side
GOVERNOR
LEVER
SPEED CONTROL LEVER
and BRACKET
26 15
Color : Silver
EX13, 17, 21, 27 / 60Hz (STD)
15 15
(Speed con. side)
(Governor lever side)
Color : Gold
EX21, 27 / 50Hz
10 20
Color : Gold
EX13, 17 / 50Hz