Filter
Top Products
D.
Main bearina cover and aovemor aear
(1)
Insert washer into governor gear shaft.
(2)
Insert governor gear along with sleeve into governor gear shaft.
(3)
Insert ball and spring into the
oil
relief valve
hole
and tighten bolt
by
the
specified torque.
Tightening Torque
:
6.9
-
8.8
N
-
m
(70
-
90
kg
acm,
5.1
-
6.5
ft
-
Ib.)
(4)
Tighten oil drain plugs on both side
of
main bearing cover.
GOVERNOR
SLEEVE
7
GOVERNOR
GEAR
q-.OIL
PUMP FILTER
WASHER
OIL
PRESSURE
OIL DRAIN PLUG
MAIN BEARING
RETAINER PLATE
Fig.
5-26
5-4-3
Reassembly
1)
CRANKSHAFT
(1)
Install crankshaft
on
crankcase wrapping the
key-way with polyvinyl tape to avoid
damage
to
oil
seal.
Note:
Apply
enough oil to bearing
portion
of
crankcase. For easy installation, put
crankcase
on
box
or
wood
blocks.
(2)
Install woodruff key for flywheel on crankshaft.
-
Fig.
5-27
-
30-