Filter
Top Products
m
C.
PISTON
and CONNECTING
ROD
(1)
Install
oil
ring first, then second ring and top
ring.
Spread ring only far enough
to
slip over piston and
into correct groove.
Use
care not
to
distort ring.
NOTE
;
*
Install second ring with punched mark beside the gap face upward.
*
Top
ring can be fit either way.
*
As
for oil ring, rails should be placed
on
and below
the
expander.
(2)
Apply
enough oil
to
small
end
of
connecting rod and piston pin, and fix connecting rod to piston with
piston pin.
(3)
Use clips on the
both
side
of
the piston pin to secure piston pin in position.
TOP
RING
BARREL
TAPER
@
RING
@
RING
RING
OIL
COMBINATION
Fig.
5-25
-
29-